1⁄48Messerschmitt Bf109 G-6
IntroductionThe Messerschmitt Bf109 is probably one of the more iconic World War 2 German fighter aircraft. First operationally used during the Spanish Civil War in 1937, the aircraft went on to be the main fighter of the Luftwaffe. The Bf109 was flown the by the three top aces of the Luftwaffe during World War 2, claiming more then 900 victories between them. Throughout the war, the Bf109 went through improvements, with the G-series introduced in mid-1942. The major improvement of the G's was the more powerful DB605 engine.
A new molding from Tamiya features the Bf109G-6, a mid example of this "G" series.
Contents6 Plastic Sprues 1 Clear Plastic Sprue 1 Vinyl Rubber Sprue 2 Small Magnets 2 Metal Washers 2 Decal sheets 1 Masking Sheet 2 Instruction Sheets (store options separate) 1 Large Colored Painting and Marking Guide
ReviewIt has been a while since I have been able to lift the box top on a newly tooled kit from Tamiya, and my initial inspection showed my why so many people like Tamiya's quality. The moldings are superb, no flash, no sink marks, and only a couple of ejector marks. The overall detail is great, fine engraved panel lines and rivets, and very well molded detailed parts.
The kit includes a nicely detailed cockpit, as well as a detailed engine. All the parts for these are very nice looking, with good surface details and some fine parts. Options are provided for building both of these in the open and closed position. As well Tamiya has included two small magnets that can be used to hold the engine compartment closed, and allowing to be removed for display. The kit also includes a molded "open" set of engine hatches, if you wish to display the plane with the engine permantely showing. This includes tab to hold the bottom hatch open as well. A pilot figure is also included, and looks very nice.
On the bottom of the aircraft, the wheels well look to be very well done, including the molded simulated cloth partition as the back of the wheel well. The landing gear struts also look very well molded, with nice tread and hub details on the main wheels.
One weakness I find with Tamiya kits is the lack of open ends on appropriate parts. This includes the machine guns and exhaust, both of which are molded with blunt ends. This are reasonably easy to rectify either with a small drill or replacing with aftermarket parts.
The instructions are a typical Tamiya, well laid out, with clear steps to follow. The instructions include 35 steps for building this kit, but you will need to watch for some optional steps, based on the variant you want to build. The instructions include paint callouts along the way, referencing Tamiya paints. There are also some decals to be applied along the way to watch out for as well.
The main instructions included the marking placement for the general stencils, but Tamiya included a large colored sheet to show the painting and marking for three different aircraft.
- 9./JG54, February 1944 - 7./JG27, Maleme, Crete, December 1943 - 9./JG52, Novo-Zaporozhye, October 1943
Also included is a folder out with background information on the Bf109.
A review of the decals, included on two sheets, looks to show well printed decals with sharp color and all in register. One sheet looks to include the common markings, while the other sheet includes the specific aircraft markings.
BuildBuilding this Bf109 from Tamiya starts with the cockpit, like many aircraft kits. Out of the box, the parts build a nice cockpit. Tamiya does include a decal for the seat belt, but I decided to replace the entire seat for an aftermarket part from Ultracast, with the seatbelt cast in place. As for the rest, it went together very well with no fit issues, this includes fitting the assembly between the fuselage halves. A decal is included for the instrument panel, that does look very good when applied.
Onto the wings, there are a couple of parts for the landing gear bay, then sandwiching the wings together. Again no fit issues at all. A nice touch is that Tamiya provides separate control surface, allowing the flaps to be put in either the up or deployed position. The tabs for the connection points are solid and provide great fit and sturdy connection.
A great addition to the kit is a masking sheet for the canopy parts. It should be noted that while the sheet is marked, it is not pre-cut. I just followed the markings provided on the sheet, and the masks fit right into place.
The engine built up very nice, and the kit provides a solid connection to the fuselage molded right onto the fuselage. This makes for a very sturdy placement of the engine. I painted the engine black, and dry brushed with a little steel for effect then added the decals for it.
That attachment of the wings to the fuselage was no issue, and I was very happy with the fit, no gaps. I did find that I needs just a little putty on the front of the wing, but nothing bad.
As I planned for open engine compartment and cockpit, the planning for painting needs to be considered. With the the major parts assembled, it was time for priming. I masked of the cockpit, engine and wheel wheels to start. I primed with Ammo by Mig Black Primer prior to painting with Vallejo Air paints. I painted the engine compartment hatches separately, including the the rudder.
The landing gear and propeller were primed and painted separately prior to attaching.
The biggest let down I found in the kit were the decal. While they looked very good on the sheet, I found the bigger decals, the rear blue stripe and belakruz did not sit down in the panel lines and details, even with a lot of SolvaSet applied. For the larger decals, I did run a sharp knife over the panel line details and reapply SolvaSet a few more times. While working with the decals, I did notice they thicker then a lot of other on the market today.
With all the parts assembled, final weathering was applied, and I was very happy with the result. This is an amazing new tooled release from Tamiya of the Bf109, with great fit, ease of assembly, the kit almost falls together.
OverviewI am very impressed with the Bf109G-6 from Tamiya, the kits is molded superbly and the fit is just outstanding. There are great looking detail from nose to tail, with good surface details and great looking interior details. The build is just as awesome with great fit and ease of build. There are many options for open hatches and position-able surface controls. The only issue I found was during finalising the build, the decals. They decals in the kit while looking good on sheet, but when applying I found them rather thick and difficult to lay into the surface details. I would definitely recommend this kit.
Copyright ©2020 by Kevin Brant. Images and/or videos also by copyright holder unless otherwise noted. The views and opinions expressed herein are solely the views and opinions of the authors and/or contributors to this Web site and do not necessarily represent the views and/or opinions of P47 Heaven, KitMaker Network, or Silver Star Enterrpises. All rights reserved. Originally published on: 2018-02-27 00:00:00. Unique Reads: 13084