login   |    register
P-47 Modelling
For posting photos of completed models, campaigns, and other general modeling topics.
OFFICIAL: SOSIG Campaign!
AussieReg
Staff MemberAssociate Editor
AUTOMODELER
#007
Visit this Community
Victoria, Australia
Joined: June 09, 2009
KitMaker: 8,137 posts
P47 Heaven: 438 posts
Posted: Wednesday, September 02, 2020 - 11:42 AM UTC
Thanks for a great Campaign John, always love seeing a bunch of 'Bolts coming together!

Congrats to everybody who contributed, we put together a very nice gallery.

Cheers, D
md72
#439
Visit this Community
Washington, United States
Joined: November 05, 2005
KitMaker: 4,874 posts
P47 Heaven: 37 posts
Posted: Wednesday, September 02, 2020 - 06:21 AM UTC
Thanks, it looks nice up there on the ribbon board. Great campaign guyz, it got me to try a new (to me) manufacturer and a challenging build.
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
Visit this Community
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,884 posts
P47 Heaven: 26 posts
Posted: Wednesday, September 02, 2020 - 03:53 AM UTC
Time to wrap this one up. Very nice 'Bolts everyone! Congrats to those who finished and thanks to everyone for participating. Ribbons have been awarded so if you didn't get one and think you should have, let me know.

Michael
john41492
#442
Visit this Community
Malacca, Malaysia
Joined: July 20, 2015
KitMaker: 359 posts
P47 Heaven: 26 posts
Posted: Tuesday, September 01, 2020 - 05:36 AM UTC
Hi All,

Nice finish Nigel! I really like the shading effect on your paint job. Well done.

So, this brings our campaign to an end. I must say that it has been a great success! 8 of 12 crossing the finish line, great job!

A special thanks to everyone that participated and followed along with the campaign. It's never too soon to start thinking of a theme for our next campaign.

Thanks again!

John
AussieReg
Staff MemberAssociate Editor
AUTOMODELER
#007
Visit this Community
Victoria, Australia
Joined: June 09, 2009
KitMaker: 8,137 posts
P47 Heaven: 438 posts
Posted: Monday, August 31, 2020 - 02:41 AM UTC

Quoted Text

Just in time, here's my second entry to the SoS Campaign.
Another 1/48th Tamiya Razorback.



Top shelf as always mate, excellent build! Two completed in one Campaign, unheard of!

Cheers, D
lampie
#029
Visit this Community
England - East Midlands, United Kingdom
Joined: December 23, 2005
KitMaker: 6,249 posts
P47 Heaven: 1,470 posts
Posted: Monday, August 31, 2020 - 12:20 AM UTC
Just in time, here's my second entry to the SoS Campaign.

Another 1/48th Tamiya Razorback.










lampie
#029
Visit this Community
England - East Midlands, United Kingdom
Joined: December 23, 2005
KitMaker: 6,249 posts
P47 Heaven: 1,470 posts
Posted: Monday, August 24, 2020 - 08:06 PM UTC

Quoted Text

Hi All,

Well we've got less than a week to wrap this one up! I was looking in the gallery, and we've got seven impressive builds represented! Nigel, still would love to see yours in there!

John




Its coming dont worry 😊
john41492
#442
Visit this Community
Malacca, Malaysia
Joined: July 20, 2015
KitMaker: 359 posts
P47 Heaven: 26 posts
Posted: Monday, August 24, 2020 - 07:54 PM UTC
Hi All,

Well we've got less than a week to wrap this one up! I was looking in the gallery, and we've got seven impressive builds represented! Nigel, still would love to see yours in there!

John
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
Visit this Community
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,884 posts
P47 Heaven: 26 posts
Posted: Saturday, August 01, 2020 - 03:50 AM UTC
Alright, your fearless leader has asked for one more month. How can I say no? (You'll see how if anyone asks for more then!)

This campaign will now end on 1 September, so hop to it!

Michael
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
Visit this Community
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,884 posts
P47 Heaven: 26 posts
Posted: Saturday, August 01, 2020 - 01:27 AM UTC

Quoted Text


Small extension please boss?



Well, it's John's campaign. But we've already had one extension. I'll leave it up to John, but would point out that if you already have one finished (and posted in the gallery), you've qualified for the ribbon anyway.

Michael
AussieReg
Staff MemberAssociate Editor
AUTOMODELER
#007
Visit this Community
Victoria, Australia
Joined: June 09, 2009
KitMaker: 8,137 posts
P47 Heaven: 438 posts
Posted: Friday, July 31, 2020 - 08:21 PM UTC
Awesome jacket Nige, and what's that . . . . SECOND BUILD ???

Nice work, looks great!

Cheers, D
lampie
#029
Visit this Community
England - East Midlands, United Kingdom
Joined: December 23, 2005
KitMaker: 6,249 posts
P47 Heaven: 1,470 posts
Posted: Friday, July 31, 2020 - 07:54 PM UTC
Thanks everyone for some really fantastic builds!

John, heres the Rat Racer artwork on the back of my A2 jacket. It differs slightly from what was on the P-47 but is based on the original drawing which Frank MaCauley saved. It also listed the colours he wanted which made life very easy!



My second build,( how many times have you heard me say that?.....ZERO!) for the campaign is varnished and just needs the last few bits and pieces fitting which hopefully I'll get time for over the next few days.
Small extension please boss?

john41492
#442
Visit this Community
Malacca, Malaysia
Joined: July 20, 2015
KitMaker: 359 posts
P47 Heaven: 26 posts
Posted: Friday, July 31, 2020 - 05:45 PM UTC
Hey folks!

This one is coming to an end, so I did finish Rat Racer! It didn't come as easily as I thought it would have though. Aside from the "ghost seams" from the plastic shrinking at different rates post injection, I had fit problems with the wheels onto the strut. This resulted in using a bit too much glue, and getting a bulge that had to be taken care of.



In the end, following lots of different decal softeners (Don't use Solvaset on Techmod decals!), and a spare Techmod 55" red boardered star, I got her done.

So, I used Loon models "C" cowling with the open cowls (highly recommend!), a True details P-47 seat with belts, and a Brassin 75 gallon drop tank. The Superscale decals gave me a bit of a problem by not wanting to conform, and they also lack the starboard side nose art of "Happy". Still they do look nice once they were sealed with Future.

Here's Lt. Frank McCauley's P-47C-2-RE circa October 1943. An interesting note, Frank McCauley passed away in 2017, at the tender age of 103!













Following this post, I did discover a interesting thing on the crop feature which plays with the lighting (I really dislike upgrades when they change the way I like doing things!). I edited the photo's in the gallery section.

Also, a very special thanks to all that participated in this campaign! Thank you! Quite a turnout and lots of P-47's for all to see!

Thanks again!

John
john41492
#442
Visit this Community
Malacca, Malaysia
Joined: July 20, 2015
KitMaker: 359 posts
P47 Heaven: 26 posts
Posted: Friday, July 31, 2020 - 05:10 PM UTC
Hi All,

Mark and Pasi, very nice finishes!

Winding this one down, and yes it was me that asked for the extension, I think it helped get a couple more over the line!

So I split the dual build when I suffered a NMF issue on the D-25. This was a bit of a surprise as I've not encountered this with Alclad II before. My guess is environmental issues here. This caused me to shift gears.

I stripped the port wing clean, a side note, one can see how lacquer based paints actually incorporate themselves into the plastic.



At this point I abandoned the overall NMF, and decided to do Capt. Russell Westfall's "Animosa II" (which is actually Animosa III). Taking what remained of my homebrewed RAF dark green from my B-25 build, I shot the uppers.



I then followed this with an olive drab anti-glare panel in front and behind the cockpit, as well as NMF for the nose art.


Then I went ahead and decaled it using the Superscale set, and the Tamiya ensignia and stripes. Turned out ok I think.



Given the timing, and having enjoyed the results from using oils on my B-17 to weather, and seeing an additional photo reference, I'm going to take a bit of time to finish this one up right. So she'll be seen on the Hangar Queen 10 campaign!
md72
#439
Visit this Community
Washington, United States
Joined: November 05, 2005
KitMaker: 4,874 posts
P47 Heaven: 37 posts
Posted: Thursday, July 30, 2020 - 06:57 PM UTC
Lots of luck on the 1/48. Looks like there's a couple vac options and a resin conversion out there.
AussieReg
Staff MemberAssociate Editor
AUTOMODELER
#007
Visit this Community
Victoria, Australia
Joined: June 09, 2009
KitMaker: 8,137 posts
P47 Heaven: 438 posts
Posted: Thursday, July 30, 2020 - 06:45 PM UTC
That's a wild looking Razorback Mark, I would love to get hold of a 1/48 version! Very nice work on a tough kit.

Cheers, D
md72
#439
Visit this Community
Washington, United States
Joined: November 05, 2005
KitMaker: 4,874 posts
P47 Heaven: 37 posts
Posted: Thursday, July 30, 2020 - 06:26 PM UTC
It's Over! Finishing with a day to spare. MPM 1/72 XP-47H Thunderbolt.

A kit from their stone age, thick gates, butt joints, vac canopy. Basic details and few decals.

Quite the challenge, I think I did OK, learned a bit and and tried a couple of new techniques.

Off to the galleries!
PasiAhopelto
Visit this Community
Uusimaa, Finland
Joined: October 01, 2016
KitMaker: 512 posts
P47 Heaven: 6 posts
Posted: Monday, July 27, 2020 - 01:22 AM UTC
Thanks Damian.

There were minor fit issues in wing to fuselage joint and flaps were bit too wide when PE end plates were glued. Wing tank supports (small inverted V's) didn't seem to fit, so had make replacements. But otherwise no issues with the kit.
AussieReg
Staff MemberAssociate Editor
AUTOMODELER
#007
Visit this Community
Victoria, Australia
Joined: June 09, 2009
KitMaker: 8,137 posts
P47 Heaven: 438 posts
Posted: Sunday, July 26, 2020 - 03:44 AM UTC
Very nice looking build there Pasi, great job! How was the fit of the kit, any difficulties along the build?

Cheers, D
PasiAhopelto
Visit this Community
Uusimaa, Finland
Joined: October 01, 2016
KitMaker: 512 posts
P47 Heaven: 6 posts
Posted: Sunday, July 26, 2020 - 01:14 AM UTC
And done:





I'll add photos to gallery next. Thanks for the campaign. Hasegawa's 1/32 planes are fun to build with good balance between level of detail and complexity of the kit. (This was Eduard kit with Hasegawa plastic, Eduard add-ons and decals.)
Bigrip74
Visit this Community
Texas, United States
Joined: February 22, 2008
KitMaker: 5,026 posts
P47 Heaven: 17 posts
Posted: Tuesday, July 21, 2020 - 06:52 AM UTC

Quoted Text

Great to see progress made on your duo John, nice work!

Cheers, D



D. stated what I wanted to say John. Great work so far.

Bob
AussieReg
Staff MemberAssociate Editor
AUTOMODELER
#007
Visit this Community
Victoria, Australia
Joined: June 09, 2009
KitMaker: 8,137 posts
P47 Heaven: 438 posts
Posted: Friday, July 17, 2020 - 12:39 AM UTC
Great to see progress made on your duo John, nice work!

Cheers, D
john41492
#442
Visit this Community
Malacca, Malaysia
Joined: July 20, 2015
KitMaker: 359 posts
P47 Heaven: 26 posts
Posted: Thursday, July 16, 2020 - 07:12 PM UTC
Hi All,

It's been a while since I've made an update, and with the clock ticking, here it is!

First, I'd like to mention that it's great to see the finished jugs finally making it into the gallery, I was getting a little worried (Nigel, looking forward to seeing your completed build here too). Second, we've got some really nice builds that have happened here! Bob, nice finish on the older kits, D, nice finish!

So, I left off with two arframes, a -C-2-RE, and a -D-25-RE. I put a bit more focus onto the C variant, mostly due to the Loon models resin cowl, which did a pretty darned good job. A product worth the cost. It is a drop fit, and on my sample very little cleanup was needed.

I did notice an oddity on both of my builds. I've built the D-25 twice before, and noticed an odd sink on the C. I also looked at the D that I'm constructing and it too had the same sink marks. My guess is the molds are showing their wear, as my earlier builds were from earlier presses.

One can see the sink mark on the port wing. This matches the landing gear bay molded on the inside. Just something to note. I went about two ways to remove these, on the port side I sanded it down no problem, though the starboard side was a bit more stubborn, so I used some Mr. Surfacer 1000. Problem solved.


At about this time I switched over to the -D, as my wife wanted me to build it. Happy wife, happy life! How could I say no? Once the cockpit was painted, the build went very fast.

Two hours later, I had an airframe!





Next, I went ahead and masked the canopy's and prepared for the black basing.



Then the black base, on the -C, I used Mr. Surfacer 1500 Black, on the -D, Tamiya Gloss Black.



I gave the Mr. Surfacer a wipe of an old cotton shirt and it looked great! Then was time to add some white for the ID bands worn by the earlier birds to distinguish themselves from the Fw-190's in theater.


I almost goofed on the fin's band width, fortunately, I had a superb reference at my fingertips! Yes Nigel, that would be your book! Thank you!

I was also able to lay down some Alclad II Airframe Aluminum to the -D. Both were coming along good, though the Alclad gave me a bit of trouble that I'm attributing to environmental issues, high humidity, heat and a lot rainy days.


At this point the -C was moving along quite nicely!



For practical purposes, I chose to focus on the -C. I have begun the decaling process, and will admit the SuperScale set for Rat Racer, is not behaving very nicely. I'm slugging through and am confident that at the end of the day all will be well.

Stay safe and have fun!!
Bigrip74
Visit this Community
Texas, United States
Joined: February 22, 2008
KitMaker: 5,026 posts
P47 Heaven: 17 posts
Posted: Friday, July 10, 2020 - 05:08 PM UTC
Looks, like I need to start purchasing Tamiya kits instead of the low dollar stuff I buy.
AussieReg
Staff MemberAssociate Editor
AUTOMODELER
#007
Visit this Community
Victoria, Australia
Joined: June 09, 2009
KitMaker: 8,137 posts
P47 Heaven: 438 posts
Posted: Friday, July 10, 2020 - 01:33 PM UTC

Quoted Text

D. your 47 looks really good, how did you get the canopy to look so crystal clear.

Bob



Thanks Bob! I might go back to this one a bit later and do some more weathering work with oils and pastels, but for now it's on the shelf and I will move on to other builds.

The canopy got no treatment at all, it's just the quality of the Tamiya clear parts. I set it in place with TET once the fuselage was closed up, then carefully masked it up and it stayed that way through the rest of the build. I think just protecting it from scuffs and scratches makes a big difference.

Cheers, D