1⁄35Working with Paint Masks
working with painting masks
needed toolsX-acto knife with new blade
A model, paints, airbrush
A paint mask set.
procedings...The first thing that you should do make sure the model is clean of dust and fingerprints. After that make sure your work area is also clean. Then you need to wash your hands. This is very important as oil and dust can affect the way the mask sticks to the model.
Note: ďAs a sign painter, I have learned the hard way that you can never wash your hands too many times.Ē
Cut the mask you want to use apart from the sheet. Make sure you donít cut any other mask by accident!
Start by painting the lightest color first. When this color is completely dry, you can start applying the mask.
Carefully peeling and sticking one piece at a time, apply the mask for the lightest color. Make sure you rub down each piece thoroughly around the edges with your finger.
Once you get the mask on, start your ready to apply the second color, working from light to dark. Remember, mask as much of the rest of the model as you feel comfortable with. You donít want any overspray. Try to paint the model with your airbrush as close to perpendicular to the model as possible and build up the color slowly. This assures you complete coverage and no raised edges.
When the paint is completely dry, apply the mask for the second color. It is important to wait for each color to dry thoroughly. This will help in preventing the paint from peeling. Once the mask is on, apply the next color.
As each color is painted and dries, continue apply mask and painting until you have painted all the colors.
Once the paint has dried to the touch, you can remove your mask. I use an x-acto knife and tweezers, making sure not to scratch the paint with my x-acto knife.
Since I am painting an aircraft carrier, I apply the mask for the deck stripes next. I peel away the mask where I want the paint to go. This in sign painter lingo is called weeding. After I have weeded the mask, I use blue painters tape to hold the mask together where the long deck stripe is. After applying the tape, I apply the mask to the deck. Remove the blue tape, and paint the stripes. Once the paint is dry, I can now remove all the masking. Now that the deck is done, I can paint the rest of the ship, masking the finished deck.
The great thing about using paint mask is that you can paint your model just like the real subject was painted. Also, weathering becomes easier. With aircraft carriers, the deck stripes wore away with each landing. Getting this effect is easy with a paint mask, just by lightly spraying the stripe color where itís worn. Complicated patterns, no decal silvering and added realism makes using paint mask a very useful modeling tool.
Copyright ©2020 by Kenny Loup. Images and/or videos also by copyright holder unless otherwise noted. The views and opinions expressed herein are solely the views and opinions of the authors and/or contributors to this Web site and do not necessarily represent the views and/or opinions of P47 Heaven, KitMaker Network, or Silver Star Enterrpises. All rights reserved. Originally published on: 2006-06-05 00:00:00. Unique Reads: 10030